מדריך התקנה Pylink על unrealircd4 && inspircd

Chief Sat Nov 18, 2017 6:32 am

מדריך התקנה Pylink על unrealircd4 && inspircd
שלום חברים מדריך הזה תוכלו לראות מדרך הוידיאו וללימוד אותו אני אכתוב לכם את התקנות שלב אחרי שלב שתוכלו להדביק

שלב ראשון התקנה PYTHON

Code:: cd /usr/ports/lang/python/ && make install clean cd /usr/ports/lang/python34/ && make install clean cd /usr/ports/devel/py34-setuptools/ && make install clean cd /usr/ports/devel/py3-pip/ && make install clean python3.4 -m ensurepip pip3 install setuptools pip3 install pyyaml pip3 install ircmatch pip3 install passlib pip3 install expiringdict

שלב שני להתקין את PYLINK

Code:: git clone https://github.com/GLolol/PyLink.git git checkout devel git pull python3 setup.py install --user

שלב השלישי הוא ליצר לינק באחד משרתים שאתם משתמשים
INSPIRCD

Code:: <link name="PyLink.Basic.NanaChat.co.il" ipaddr="192.168.1.219" port="7000" allowmask="192.168.1.219" timeout="300" ssl="openssl" bind="192.168.1.219" statshidden="no" hidden="no" sendpass="asher" recvpass="asher">

או ב UNREALIRCD4

Code:: listen { ip 192.168.1.219; port 6900; options { serversonly; }; }; link pylink.irc.Linux.ISRAEL { incoming { mask 192.168.1.219; }; outgoing { bind-ip 192.168.1.219; hostname 192.168.1.219; port 6900; options { }; }; password "asher"; class servers; }; ulines { pylink.irc.Linux.ISRAEL; listen 192.168.1.219; };

אחרי שיצרתם לינקים באחד משני הגירסאות ההלו עליכם ליצור בלוקים ב pylink.conf לדוגמא
INSPIRCD

Code:: NanaChat: ip: 192.168.1.219 port: 7000 recvpass: "asher" sendpass: "asher" netname: "NanaChat" hostname: "PyLink.Basic.NanaChat.co.il" sid: "0PY" sidrange: "8##" channels: ["#pylink"] #pylink_channels: ["#services"] #automode_channels: ["#chat"] protocol: "inspircd" autoconnect: 5 encoding: cp1251

unrealircd4

Code:: LinuxNet: ip: 192.168.1.219 port: 6900 recvpass: "asher" sendpass: "asher" hostname: "pylink.irc.Linux.ISRAEL" sid: "2PY" netname: "LinuxNet" sidrange: "8##" protocol: "unreal" autoconnect: 5 encoding: cp1251

אחרי שיצרתם את הבלוקים לשתיי השרתים או אחד משניהם שאתם משתמשים עליכם להתקין את השראות שלכם בpylink לדוגמא

Code:: permissions: # Note: It is a good idea to quote any exttargets or hostmasks so the configuration parser knows # they are raw strings. "$ircop": - opercmds.kill - opercmds.mode - opercmds.checkbanre.re - opercmds.checkban - global.global - core.rehash - core.load - core.unload - opercmds.topic - opercmds.mode - opercmds.kick - opercmds.checkban - opercmds.chghost - opercmds.masskill - opercmds.massban - automode.manage "*!*@*": - commands.loglevel - bots.joinclient - opercmds.chghost - opercmds.chgname - opercmds.massban - opercmds.massban.force - opercmds.masskill - opercmds.masskill.force

פקודות ב PyLink

Code:: /msg PyLink create #channelname /msg PyLink destroy #channelname /msg pylink identify Admin 123456 /msg pylink rehash /msg pylink kill Nick reason //msg pylink massban #test *!*@5.152.158.4 lala -q -f -o //msg pylink massban #test *!*@5.152.158.4 lala -f //msg pylink masskill Chief!*@NanaChategi.me4.152.5.IP fdfdf -ak -f -o //msg pylink topic #channel Welcome to bla bla

פקודות ב Automode

Code:: /msg automode setacc #טריוויה TriviaRoBoT*!*@* +q /msg automode setacc #asher *!*@* +o /msg automode setacc #asher *!*@Welding.Pipeline +q //msg automode delacc #ASHER סברס*!*@* /msg automode delacc #asher *!*@* /msg automode setacc #ircd *!*@192.168.1.12 +o

אני אעתיק לכם שתיי קונפיג שתוכלו להישתמש בהם בהצלחה בהמשך!!!
מדריך זה נעשה על ידי ASHER
קרדיט והמון תודות ל GLolol על עזרה ותמיכה
BMT IRC Network

Chief Sat Nov 18, 2017 6:35 am

Code:: # This is a sample configuration file for PyLink. You'll likely want to rename it to pylink.yml # and begin your configuration there. # Note: lines starting with a "#" are comments and will be ignored. # Note 2: Use SPACES, NOT tabs to indent, or you will get parser errors on start! # Defines general settings for the PyLink server. Prior to PyLink 1.2, this configuration block # was named "bot:". pylink: # Sets nick, user/ident, and real name. nick: PyLink ident: pylink realname: PyLink Service Client # Server description (shown in /links, /whois, etc.) serverdesc: PyLink Server # Sets the fantasy command prefix for the main PyLink bot. To configure fantasy prefixes for # other service bots, add or modify the "prefix:" option in the configuration section of each # plugin. (see the "games:" block for an example) # Note: prior to PyLink 1.2, defining a prefix here made it global for all service bots. This # was removed because it called all bots in a channel at once (even if they have conflicting # commands), which usually leads to one successful reply and a string of "Command not found" # errors. # Note 2: this option REPLACES the deprecated "prefixes:" option from PyLink 1.1 and earlier. prefix: "&" # Determines whether PyLink service bots will respond to commands prefixed with their nick # (requires the fantasy plugin). Prior to PyLink 1.2, this option was named "respondtonick"; # it was renamed for consistency. This defaults to false. #respond_to_nick: true # Determines whether PyLink service clients should protect themselves from # kicks, kills, etc. using IRCd-side servprotect modes. For this to work # properly, this usually requires that PyLink be U-Lined. This defaults to # False. #protect_services: false # Determines whether services should default to sending command responses as private notices, # even if the command was called in a channel. This defaults to False. #prefer_private_replies: false # Determines whether spawning additional services for bots (e.g. Automode, Games) should be # enabled. This defaults to True, unless a network's protocol module doesn't support spawning # extra service bots. If this is set to false, the other plugins' commands and channels will # be merged into that of the main PyLink service bot. #spawn_services: true # Determines the default ban style that PyLink should use for setting bans (e.g. in Antispam) # $ident, $host, $realhost, $ip, and $nick are among the supported substitutions here. # This defaults to "*!*@$host" if not set. # You should take extra caution that 1) the resulting mask is a valid nick!user@host # 2) generated bans actually match the target user #ban_style: "*!*@$host" #ban_style: "*!$ident@$host" # A possible alternative # Defines extra directories to look up plugins and protocol modules in. # Environment variables (e.g. $HOME) and home folders (~) are expanded here, in that order. #plugin_dirs: ["~/my-plugins", "~/pylink-contrib-modules/plugins"] #protocol_dirs: ["~/pylink-contrib-modules/protocols"] # Determines whether service bots should return unknown command errors. Defaults to true if not # speciifed. #show_unknown_commands: true # Determines whether hideoper modes should be respected in WHOIS replies. # Defaults to true if not specified. #whois_use_hideoper: true # Determines whether extended WHOIS replies should be sent to users marked as a # bot (usually with umode +B). For better security (i.e. with bots that track services # accounts for authentication), it is recommended to leave this off. #whois_show_extensions_to_bots: false # Determines whether PyLink should return its time of initial connection when replying to WHOIS # for service bots. This defaults to true if not set. #whois_show_startup_time: true # Determines how long plugins should wait (in seconds) before flushing their # databases to disk. Defaults to 300 seconds. Changes here require a reload # of all database-enabled plugins to take effect. #save_delay: 300 # Determines whether that service bots should join preconfigured channels even if they are empty. # This can also be overriden per-network via the "join_empty_channels" variable. # This defaults to False if not set. #join_empty_channels: false login: # NOTE: for users migrating from PyLink < 1.1, the old login:user/login:password settings # have been deprecated. We strongly recommend migrating to the new "accounts:" block below, as # it supports multiple accounts, hashed passwords, and allows more flexibility (accounts no # longer imply admin access). # IMPORTANT: If you're switching from login:user/login:password, you MUST ADD YOURSELF to a # "permissions:" block like the one below, or you will lose IRC administration access to your # PyLink daemon! accounts: # Creates an account with username "user1". You can define other usernames at the # same level here (key name is user name). Admin: # Defines the password for the user. You can encrypt passwords using the # 'mkpasswd' command or the 'pylink-mkpasswd' utility included with PyLink. password: "123456" # Determines whether the password given is encrypted. Defaults to false # (plain text) for backwards compatibility. encrypted: false # Optional: allows limiting this login to users from certain networks only (case sensitive). #networks: ["network1", "network2"] # Optional: allows limiting this login to opered users #require_oper: false # Optional: requires the user to match any of the following hosts. Extended targets # are supported here as well. #hosts: ["*!*@localhost", "*!*@trusted.isp"] # For ADVANCED users: adjusts settings for PyLink's default passlib CryptContext. # As of PyLink 2.1, the default is to use pbkdf2_sha256 for new hashes, while also allowing verifying # sha512_crypt for compatibility with PyLink < 2.1. # This is configured as a dict of settings, which will be passed into the CryptContext constructor. # See https://passlib.readthedocs.io/en/stable/lib/passlib.context.html for a list of valid options. # Changes to this setting require a rehash to apply. #cryptcontext_settings: #schemes: ["pbkdf2_sha256", "sha512_crypt"] permissions: # Permissions blocks in PyLink are define as a mapping of PyLink targets (i.e. hostmasks or # exttargets) to lists of permission nodes. You can find a list of permissions that PyLink and # its plugins define in docs/permissions-reference.md. Exttargets (extended targets) are # documented further in docs/exttargets.md # Permissions blocks look something like this: #"*!user@host": # - "permission.node.1" # - "permission.node.2" # - "someplugin.*" # Wildcards are also supported in names # Replace ABC123 with your PyLink account name (configured above in order to give yourself admin # access. As of PyLink 2.0, specifying a bare account name is synonymous with # "$pylinkirc:<accountname>" (i.e. the "$pylinkirc:" prefix is implied). "$ircop": - opercmds.kill - command - opercmds.mode - opercmds.checkbanre.re - opercmds.checkban - global.global - core.rehash - core.load - core.unload - opercmds.topic - opercmds.mode - opercmds.kick - opercmds.checkban - opercmds.chghost - opercmds.masskill - opercmds.massban - automode.manage - relay.create "*!*@*": - commands.loglevel - bots.joinclient - opercmds.chghost - opercmds.chgname - opercmds.massban - opercmds.massban.force - opercmds.masskill - opercmds.masskill.force # Replace ABC123 with your PyLink account name (configured above) # in order to give yourself admin access. "ABC123": - "*" # This option determines whether plugin-determined default permissions should be enabled. # You should generally only disable this if you need to configure permissions in a specific way, # because it WILL break features people expect to work (e.g. access to Relay commands) unless you # configure that in. # See docs/permissions-reference.md for a list of permissions defined by PyLink's stock plugins. # This defaults to true if not set. #permissions_merge_defaults: true servers: # Please note: these are only EXAMPLE link blocks. You should edit them and # remove ones that you don't need in your config. # Short name for the network. This is used for relay's nick suffixes, the # network plugin's (dis)connect commands, and various other places internally. # CHANGE THIS to some abbreviation representing your network; usually # something 3-5 characters should be good. NanaChat: # Server IP, port, and passwords. The ip: field also supports resolving # hostnames. ip: 192.168.1.14 port: 7000 recvpass: "asher" sendpass: "asher" # Set the bind host, useful for multi-homed hosts. #bindhost: 1.2.3.4 # The full network name, used by plugins. netname: "NanaChat" # Hostname we will use to connect to the remote server hostname: "PyLink.Basic.NanaChat.co.il" # Sets the server ID (SID) that the main PyLink server should use. For TS6-like servers # (InspIRCd, Charybdis, UnrealIRCd, etc.), this must be three characters: # the first char must be a digit [0-9], and the remaining two may be either uppercase # letters [A-Z] or digits. sid: "0PY" # Server ID range: this specifies the range of server IDs that PyLink# may use for # subservers such as Relay. On TS6, this should be a combination of digits, letters, and #'s. # Each # denotes a range (0-9A-Z) of characters that can be used by PyLink to generate SIDs. # You will want to make sure no other servers are using this range. # There must be at least one # in this entry. sidrange: "8##" # Sets the protocol module to use for this network - see the README for a list of supported # IRCds. protocol: "inspircd" # InspIRCd specific option: sets the target InspIRCd protocol version. # Valid values include: # "insp20" - InspIRCd 2.0.x (1202) [DEFAULT†] # "insp3" - InspIRCd 3.x (1205) [BETA] #target_version: insp20 #target_version: insp3 # † InspIRCd 2.0 servers can link to InspIRCd 3.0 via built-in link compatibility, but some # new features may not work correctly. # Sets the max nick length for the network. It is important that this is set correctly, or # PyLink might introduce a nick that is too long and cause netsplits! # This defaults to 30 if not set. maxnicklen: 30 # Toggles TLS/SSL for this network - you should seriously consider using TLS in all server links # for optimal security. Defaults to False if not specified. ssl: false # Optional TLS cert/key to pass to the uplink server. #ssl_certfile: pylink-cert.pem #ssl_keyfile: pylink-key.pem # New in PyLink 2.0: Determines whether the target server's TLS certificate hostnames should be # checked against the hostname we're set to connect to. This defaults to true for Clientbot # networks and others linked to via a hostname. It depends on ssl_accept_invalid_certs being # *disabled* to take effect. #ssl_validate_hostname: true # New in PyLink 2.0: When enabled, this disables TLS certificate validation on the target network. # This defaults to false (bad certs are rejected) on Clientbot and true for server protocols # (where bad certs are accepted). This disables the ssl_validate_hostname option, forcing it to # be false. #ssl_accept_invalid_certs: false # Optionally, you can set this option to verify the TLS certificate fingerprint of your # uplink. This check works independently of ssl_validate_hostname and ssl_accept_invalid_certs. #ssl_fingerprint: "e0fee1adf795c84eec4735f039503eb18d9c35cc" # This sets the hash type for the above TLS certificate fingerprint. # Valid values include md5 and sha1-sha512, and others that may be supported depending on # your system: see https://docs.python.org/3/library/hashlib.html # This defaults to sha256 if not set. #ssl_fingerprint_type: sha256 # Sets autoconnect delay - comment this out or set the value below 1 to disable autoconnect # entirely. autoconnect: 10 # Optional autoconnect settings: # Defines whether we should multiply the autoconnect delay by a certain value every time # a connection fails. This defaults to 2 if not set (30 secs becomes 60 secs, 120 secs, etc.) #autoconnect_multiplier: 2 # Defines what the maximum autoconnect time will be (defaults to 1800 secs). #autoconnect_max: 1800 # Autojoin channels. The "channels" option affects all service bots, but you can also # configure channels per service using keys in the name of "<servicename>_channels" # Comment out or remove these keys if you don't want service bots# to join any channels by # default. channels: ["#reut"] pylink_channels: ["#123"] automode_channels: ["#123"] # Encoding: allows you to override the network's encoding. This can be useful for networks # using m_nationalchars or something similar. Encoding defaults to utf-8 if not set, and # should be one of the standard encodings defined at # https://docs.python.org/3/library/codecs.html#standard-encodings # Changing this setting requires a disconnect and reconnect of the corresponding network # to apply. # This setting is EXPERIMENTAL as of PyLink 1.2.x. encoding: cp1251 # Sets the ping frequency in seconds (i.e. how long we should wait between sending pings to # our uplink). When more than two consecutive pings are missed, PyLink will disconnect with # a ping timeout. This defaults to 90 if not set. #pingfreq: 90 # If relay nick tagging is disabled, this option specifies a list of nick globs to always # tag when introducing remote users *onto* this network. #relay_forcetag_nicks: ["someuser", "Guest*"] # Sets the suffix that relay subservers on this network should use. If not specified per # network, this falls back to the value at relay::server_suffix, or the string "relay" if # that is also not set. #relay_server_suffix: "relay.yournet.net" # Determines whether relay will tag nicks on this network. This overrides the relay::tag_nicks # option on a per network-basis. #relay_tag_nicks: true # Determines the maximum size of the network's outgoing data queue (sendq), in message lines. # This defaults to 4096 if not set. #maxsendq: 4096 # Defines a list of "U-lined" servers that should be given special treatment when overriding # modes. Relay uses this as a list of servers to IGNORE some mode changes from on a claimed # channel (versus bouncing the mode back, which may be floody). #ulines: ["services.example.conf"] # InspIRCd specific option: determines whether we should display WHOIS extensions by overriding # InspIRCd's default WHOIS formatting. This defaults to true for consistency with PyLink 1.x. #force_whois_extensions: true unrealnet: ip: ::1 port: 8067 # Determines whether IPv6 should be used for this connection. Should the ip: # above be a hostname instead of an IP, this will also affect whether A records # (IPv4) or AAAA records (IPv6) will be used in resolving it. # As of PyLink 2.0-beta1, you can leave this unset for direct connections to IP addresses; # the address type will be automatically detected. #ipv6: yes # Received and sent passwords. For passwordless links using SSL fingerprints, simply set # these two fields to "*" and enable SSL with a cert and key file. recvpass: "coffee" sendpass: "tea" ssl: true #ssl_certfile: mycert.pem #ssl_keyfile: mycert.pem hostname: "pylink.example.com" sid: "2PY" sidrange: "8##" protocol: "unreal" autoconnect: 10 # Sets the full network name, used for display purposes. netname: "Network name" # You can also define network-specific nicks, idents, and hosts for various service # bots, using the configuration options "servicename_nick", etc. #pylink_nick: MagicServ #pylink_ident: magicserv #pylink_host: magicserv.mynet.net #pylink_realname: Magic Link Service #games_nick: MagicGames #games_ident: magicgames #games_host: games.mynet.net #games_realname: Magic Games Service nefarious: ip: somenet.ddns.local port: 45454 # When the IP field is set to a hostname, the "ipv6" option determines whether IPv4 or IPv6 # addresses should be used when resolving it. You can leave this field blank and use an # explicit bindhost instead, which will let the the address type be automatically detected. #ipv6: false #bindhost: 1111:2222:3333:4444 # Note: if you are actually using dynamic DNS for an IRC link, consider enabling # TLS/SSL certificate checking (new in 2.0). These checks are disabled by default for # server links because self-signed certificates are still quite common. ssl: true #ssl_accept_invalid_certs: false #ssl_validate_hostname: true recvpass: "PASS123" sendpass: "PASS321" hostname: "pylink.somenet.ddns.local" # For P10, the SID and SID range options correspond to P10 server numerics. The PyLink # "sid" should be the numeric of the main server, and "sidrange" should be a range of # numerics that subservers (e.g. for relay) can use. # Make sure no other servers are in the numeric range you're reserving for PyLink, or you # may get conflicts. sid: 50 sidrange: "100-150" #channels: ["#lounge"] protocol: p10 autoconnect: 10 netname: "Network name" # Configures the relay separator. Note: /'s in nicks are automatically translated to | # for IRCds other than Unreal and InspIRCd, since they are not supported in nicks. #separator: "|" ### The following options are specific to P10 servers: # Determines whether extended accounts should be used for this network. # For Nefarious, this **MUST** match the EXTENDED_ACCOUNTS setting in your IRCd configuration. # For other P10 IRCds, this should be set to FALSE. use_extended_accounts: true # Sets the IRCd type. The following options are supported here: 'nefarious', 'snircd', 'ircu', # and 'generic'. This defaults to 'nefarious'. # With this key set to 'nefarious', FAKE (external vHost changing) and SETHOST (host changing # for PyLink / relay clients) are enabled, along with a set of modes tailored to Nefarious. # With this key set to 'snircd', SETHOST and a set of modes tailored to snircd are enabled. # Host changing for other users (e.g. via the changehost plugin) is not supported. # With this key set to 'ircu', a set of modes tailored to IRCu is enabled. # Host changing is not supported. # With this key set to 'generic', neither of these host changing features are enabled # and a baseline RFC1459 mode set is used. This configuration is not officially supported. # (This option was previously named "p10_ircd" in PyLink 1.2, and that option name is # deprecated as of 2.0). ircd: nefarious # Determines whether account-based cloaks should be used (someone.users.yournet.org # format). This setting MUST match your IRCd configuration. # On Nefarious, ENABLE this if HOST_HIDING_STYLE is set to either 1 or 3. # On other P10 IRCds, ENABLE this if HOST_HIDING is set to TRUE. use_account_cloaks: false # The cloak suffix to be used for account-based cloaks. This MUST match your # IRCd configuration if use_account_cloaks is enabled. cloak_suffix: "users.yournet.org" ### The following options are specific to Nefarious and should be disabled unless # you're using another P10 variant explicitly supporting them: # Halfop is optional in Nefarious. This setting should match your IRCd configuration. use_halfop: false # Determines whether account-based cloaks should be used for opers # (someone.opers.yournet.org format). If use_account_cloaks is disabled, # this will have no effect. This setting MUST match your IRCd configuration. use_oper_account_cloaks: false # The cloak suffix to be used for IRCop account-based cloaks. This MUST match your # IRCd configuration if use_oper_account_cloaks is enabled. oper_cloak_suffix: "staff.yournet.org" # Determines whether UnrealIRCd-style hashed-host cloaks will be used. # This setting should match your IRCd configuration. # ENABLE this if HOST_HIDING_STYLE is set to either 2 or 3. use_hashed_cloaks: false ts6net: ip: 1.2.3.4 port: 7000 ssl: true recvpass: "abcd" sendpass: "abcd" hostname: "pylink.example.com" sid: "8PY" netname: "Network name" sidrange: "8##" protocol: "ts6" autoconnect: 10 ### The following options are specific to TS6 servers: # Toggles owner (+y), admin (+a), and halfop (+h) support for # shadowircd/elemental-ircd/chatircd. These default to off for the best compatibility. #use_owner: false #use_admin: false #use_halfop: false # Sets the IRCd (channel/user mode set) to target - currently supported values include # 'chatircd', 'charybdis', and 'elemental' (elemental-ircd). This option defaults to # 'charybdis' if not set, and replaces the "use_elemental_modes" option from PyLink 1.2 # and earlier. #ircd: charybdis # Determines whether PyLink servers should be marked hidden in /links and /map. # This only takes effect if the 'flatten_links' option in the IRCd is enabled. # Defaults to false if not set. #hidden: false # Sample Clientbot configuration, if you want to connect PyLink as a bot to relay somewhere # (or do other bot things). magicnet: ip: irc.somenet.local port: 6697 # Optional server password. #sendpass: "wastedbytes103" netname: "Network name" #channels: ["#this-works-as-usual"] protocol: "clientbot" # You can set the PyLink bot nick and ident using the "pylink_nick" and "pylink_ident" options. #pylink_nick: pybot #pylink_ident: pybot # You can also define alternate fallback nicks on Clientbot. These will be used in order # if successive nicks are unavailable, falling back to the default nick plus an increasing # number of underscores. #pylink_altnicks: ["pybot`", "pybot-"] # TLS/SSL options. Certfile and keyfile are optional, but can be used for CertFP/SASL external # where supported. ssl: true #ssl_certfile: mycert.pem #ssl_keyfile: mycert.pem # New in 2.0: Determines whether the target server's TLS certificate hostnames should be # checked against the hostname we're set to connect to. This defaults to true for Clientbot # networks and others linked to via a hostname. It depends on ssl_accept_invalid_certs being # *disabled* to take effect. #ssl_validate_hostname: true # New in 2.0: When enabled, this disables TLS certificate validation on the target network. # This defaults to false (bad certs are rejected) on Clientbot and true for server protocols # (where bad certs are accepted). This disables the ssl_validate_hostname option, # effectively forcing it to be false. #ssl_accept_invalid_certs: false # Autoconnect options work the same as on a regular network. autoconnect: 30 #autoconnect_multiplier: 1.5 #autoconnect_max: 1800 # Message throttling: when set to a non-zero value, only one message will be sent every X # seconds. If your bot is constantly running into Excess Flood errors, raising this to # something like 0.5 or 1.0 should help. Since PyLink 2.0.2, this defaults to 0 if not set. throttle_time: 0.3 # Determines whether messages from unknown clients (servers, clients not sharing in a -n # channel, etc.) should be forwarded via the PyLink server. If this is disabled, these # messages will be silently dropped. This overrides the "accept_weird_senders" option in the # "relay:" configuration block, and defaults to True for consistency with older releases. #relay_weird_senders: false ### The following options are specific to Clientbot servers: # SASL login: for mechanisms, only EXTERNAL (SSL cert) and PLAIN (username and password) # are supported so far. # SASL PLAIN requires the sasl_username and sasl_password options to be set, while # SASL EXTERNAL requires ssl, ssl_certfile, and ssl_keyfile to work. #sasl_mechanism: "PLAIN" #sasl_username: "abc" #sasl_password: "somestrangepassword" # Defines the SASL timeout - this defaults to 15 seconds. #sasl_timeout: 15 # If this option is enabled, the bot will attempt SASL authentication even after it's # connected, as services become available throughout netsplits and reconnects. # Note: This requires an IRC server capable of IRCv3.2 cap-notify and sasl: # InspIRCd 3.x and charybdis 4+ are some compatible IRCds as of 2016-12-19. # This defaults to false. #sasl_reauth: true # Raw IRC messages to send on connect. As of 2.0-alpha2, expansions such as $nick, $ident, # and $host are also supported via Python template strings: # (https://docs.python.org/3/library/string.html#template-strings) #autoperform: # - "MODE $nick +B" # - "NOTICE somebody :hello, i've connected" # Determines whether oper statuses should be tracked on this Clientbot network. This # defaults to False for the best security, since oper status may allow more access to the # entire PyLink service than what's desired, even when PyLink is only connected as a bot. # This defaults to false if not specified. #track_oper_statuses: false # Determines whether the bot should enumerate ban/banexception/invex modes when joining channels. # This is required for relay mode sync to work properly, because the bot will otherwise refuse to # relay unbans (Clientbot only removes modes that it knows are set). # This defaults to False because it causes extra MODE messages to be sent on connect, which can # drastically slow down startup if the bot joins a lot of channels. #fetch_ban_lists: true # Plugins to load (omit the .py extension) plugins: # Commands plugin: Provides simple commands to check login status, show info on users and # channels, etc. - commands # Networks plugin: Allows you to manage connections to networks while PyLink is running. - networks # Ctcp plugin: handles basic CTCP replies (VERSION, etc) towards service bots. - ctcp # Servprotect plugin: disconnects from networks if too many kills or nick collisions to # PyLink clients are received. Requires the cachetools Python library. - servprotect # Relay plugin: Transparent server-side relay between channels (like Janus). See # the relay: block below for configuration. - relay # Relay Clientbot plugin: this allows channel messages and events like # JOIN, PART, KICK, etc. to relay over networks using Clientbot. You will # want this loaded if you're using PyLink as a relay bot. - relay_clientbot - relay.create - relay.link # Fantasy plugin: Allows you to trigger commands in channels by prefixing them # with the PyLink service's nick or configurable prefix characters. - fantasy # Oper commands plugin: Provides a handful of network management commands. (KILL, JUPE, etc.) - opercmds # Automode plugin: allows assigning channel access to specific hostmasks or # exttargets. See docs/automode.md # for a usage guide. - automode - games # Changehost plugin: Automatically changes the hostmask (i.e. sets vHosts) on # matching users as they connect. This requires the changehost: block to be # configured correctly below. - changehost # Antispam plugin: catches and punishes spammers locally and across relays as necessary. # You *will need* to configure it via the "antispam:" configuration block below. - antispam # Global plugin: Janus-style global plugin; announces messages to all channels the PyLink # client is in. - global # Bots plugin: Allows you to manipulate PyLink service bots on networks. #- bots # Servermaps plugin: displays network /map's from the PyLink server's perspective. #- servermaps # Raw plugin: Provides a 'raw' command for sending raw text to IRC. # Not supported outside Clientbot networks! #- raw logging: # This configuration block defines targets that PyLink should log commands, # errors, etc., to. # This sets the level for console logging, which is always enabled. Valid # settings include DEBUG, INFO, WARNING, ERROR, and CRITICAL: see # https://docs.python.org/3/library/logging.html#logging-levels for details. # Prior to PyLink 1.2, this option was erroneously named 'log:stdout', even though the actual # logging output goes to stderr. That option name (log:stdout) is now *deprecated*. console: INFO channels: # Logs to channels on the specified networks. # Make sure that the main PyLink client is also configured to join your # log channel in the "channels:" block for the relevant networks. # Note: Log messages are forwarded over relay, so you will get duplicate # messages if you add log blocks for more than one channel in one # relay. # Note 2: DEBUG logging is not supported here: any log level settings # below INFO be automatically raised to INFO. inspnet: "#services": loglevel: INFO "#pylink-notifications": loglevel: WARNING ts6net: "#services": loglevel: INFO files: # Logs to file targets. These will be placed in the log/ folder in the # PyLink directory, with a filename based on the current instance name # and the target name: instancename-targetname.log # When running with ./pylink, this will create log/pylink-errors.log # When running with ./pylink someconf.yml, this will create log/someconf-errors.log "errors": loglevel: ERROR # Ditto above. When running with ./pylink, it will use log/pylink-commands.log # When running with ./pylink someconf.yml, this will create log/someconf-commands.log "commands": loglevel: INFO # Uncomment this to enable debug logging. This is only needed if you're developing for # PyLink or are requested to enable this when reporting a bug. #"debug": # loglevel: DEBUG #filerotation: # Configures optional log file rotation. When enabled, PyLink will create rotate files # in the format pylink-commands.log, pylink-commands.log.1, pylink-commands.log.2, etc. # If either max_bytes or backup_count is 0, log rotation will be disabled. # Max amount of bytes per file before rotation is done. Defaults to 20 MiB (20971520 bytes). #max_bytes: 20971520 # Amount of backups to make. Defaults to 5. #backup_count: 5 changehost: # This block configures the Changehost plugin. You don't need this if you # aren't using it. # Sets the networks where Changehost should be enabled. Please note: changehost does NOT support # arbitrarily cloaking clients introduced by PyLink (e.g. relay clients), as doing so would make # ban matching impossible. In these cases, it is the remote admin's job to turn on cloaking on # their IRCd. # You can also add to this list of enabled networks by setting "servers::<server name>::changehost_enable" # to true. enabled_nets: - inspnet - ts6net # Sets the networks where Changehost hosts should be enforced: that is, any attempts # by the user or other services to overwrite a host will be reverted. # You can also add to this list of enabled networks by setting "servers::<server name>::changehost_enforce" # to true. #enforced_nets: # - inspnet # Sets the masks that Changehost enforcement should ignore: these can be users with certain # hosts, exttargets, etc. # Since PyLink 2.1, you can also add to this list on a per-network basis by adding options under # "servers::<server name>::changehost_enforce_exceptions". enforce_exceptions: - "*!*@yournet/staff/*" #- "$account" # Determines whether Changehost rules should also match the host portion of a mask by IP and # real hosts. These default to false. You can override these on a per-network basis by setting # "servers::<server name>::changehost_match_ip" or "servers::<server name>::changehost_match_realhosts". #match_ip: false #match_realhosts: false # This sets the hostmasks that Changehost should look for. Whenever someone with a matching nick!user@host # connects, their host will be set to the text defined. The following substitutions are available here: # $uid, $ts (time of connection), $nick, $realhost, $ident, and $ip. # Invalid characters in hosts are replaced with a "-". # Also, make sure you quote each entry so the YAML parser treats them as raw strings. # Since PyLink 2.1, you can also add to this list on a per-network basis by adding options under # "servers::<server name>::changehost_hosts". hosts: # Here are some examples. Note that to keep your users' details private, you should probably refrain # from using $ip or $realhost, in these hostmasks, unless cloaking is already disabled. "*!yourname@*.yournet.com": "$nick.opers.yournet.com" "*!*@localhost": "some-server.hostname" # Freenode-style masks are possible with this (though without the hashing) "*!*@bnc-server.yournet.com": "yournet/bnc-users/$ident" "*!*@ircip?.mibbit.com": "$ident.$realhost" "WebchatUser*!*@*": "webchat/users/$ident" relay: # This block defines various options for the Relay plugin. You don't need this # if you aren't using it. # Determines whether all opers should be able to create, link, delink, destroy, and adjust # claim settings & channel descriptions on relay channels. You can disable this if you want to # configure Relay permissions in a more fine grained way, e.g. by granting each network admin # their own PyLink account. # This defaults to True if not set, for consistency with older (< 2.0) PyLink versions. # Changing this setting requires a rehash and reload of the Relay plugin to apply. allow_free_oper_links: true relay.create # Determines whether all relay users' nicks will be tagged with their network, instead of only # when a nick collision occurs. It is recommended that you either leave this on or maintain a # list of nicks in "forcetag_nicks", so that your users don't complain about "nick in use" # errors. This option defaults to True if not specified. tag_nicks: true # If tag_nicks is False, this specifies a list of NICK globs that network tags should be added # for anyways (e.g. network services). # There is also a per-network version of this option: see 'relay_forcetag_nicks'. forcetag_nicks: - "*Serv" # Sets the suffix that relay subservers should use. Defaults to "relay" (as in net1.relay, # net2.relay, etc.) if not specified. This can also be specified per network via the # 'relay_server_suffix' option in a server block. #server_suffix: "relay.yournet.net" # Sets the default Relay separator. Defaults to / if not specified. The "separator" # option in server blocks override this if specified. separator: "/" # This option defines lists of networks to relay user IPs between (instead of # masking them as 0.0.0.0). If a network is in a pool (case-SENSITIVE), their # opers will see the IPs from users in the rest of the pool, and the rest of # the pool will receive IPs from that network too. # You should generally have a consensus among your linked networks as to which # network should be in which pool. A network can be part of one pool, multiple # pools, or none at all. # This option replaces the "relay::show_ips" and network-specific "relay_no_ips" # options, which are DEPRECATED as of 2.0-beta1. #ip_share_pools: # - ["net1", "net2", "net3"] # - ["net1", "meganet"] # This option defines lists of networks that kills should be relayed between. # If a network is in a pool (case-SENSITIVE), they will be able to kill users # on other networks in the pool, and will also receive kills from other networks # in the pool. # You should generally have a consensus among your linked networks as to which # network should be in which pool. # When a kill is sent to a target not sharing any kill pool with the sender's network, # the kill is relayed as a kick on the target to all shared channels where the sender # has CLAIM access. #kill_share_pools: # - ["net1", "net2", "net3"] # This determines whether private messages & notices will be forwarded over Clientbot relay, # and whether the 'rpm' command will be allowed from Clientbot networks. This defaults to # False. allow_clientbot_pms: false # Sets whether Clientbot mode sync will be enabled. Valid options: # "full" - Sync bans, ban/invite exceptions, prefix modes, and all RFC1459-standard modes. The # bot will need op in the Clientbot channel for this to work both ways. # "half" - Sync only bans, ban/invite exceptions, and prefix modes. The bot will need op in the # Clientbot channel for this to work both ways. # "none" - Turns off mode sync. This is the default. # # Note: when mode sync is enabled and the bot is opped, CLAIM protection will be enforced across # Clientbot links as well. This means that the bot will try to revert any mode changes by non-ops # or services not in the channel. The workaround is to add all Clientbot networks to the CLAIM # list of any affected channels. # #clientbot_modesync: none # Determines whether remote opers will have user mode +H (hideoper) set on # them. This has the benefit of lowering the oper count in /lusers and # /stats (P|p), but only on IRCds that support it. This defaults to true # if not set. hideoper: true # Determines whether the servers disconnecting in a netsplit should be shown when # relaying quits due to a netsplit. Defaults to False. show_netsplits: false # Determines whether LINKACL should use whitelist or blacklist mode by default for newly # created channels. This defaults to false, and can also be specified per network via the # 'relay_linkacl_use_whitelist' option in a server block. #linkacl_use_whitelist: false # Determines whether CLAIM should be enabled by default for newly created channels. # This defaults to true, and can also be specified per network via the 'relay_enable_default_claim' # option in a server block. #enable_default_claim: true # Optionally defines a message that should be sent to all leaf channels that a network owns, when # it disconnects. This uses a template string as documented at # https://docs.python.org/3/library/string.html#template-strings, with the following substitutions: # $network: the name of the network that this message is being announced to # $channel: the channel that this message is being announced to # $homenetwork: the name of the network that disconnected # $homechannel: the original name of the channel this message is being announced to # If this option is empty or not set, no announcement is made. #disconnect_announcement: >- # Network $homenetwork has disconnected: $channel will remain open as the link is # re-established, but new links will be disabled. # Determines whether messages from unknown clients (servers, clients not sharing in a -n channel, # etc.) should be forwarded via the PyLink server. If this is disabled, these messages will be # silently dropped. This defaults to True for consistency with older releases. #accept_weird_senders: false # Determines whether NickServ login info should be shown in the /whois output for # relay users. # Valid options include "all" (show this to everyone), "opers" (show only to # opers), and "none" (disabled). Defaults to none if not specified. whois_show_accounts: all # Determines whether the origin server should be shown in the /whois output for # relay users. # Valid options include "all" (show this to everyone), "opers" (show only to # opers), and "none" (disabled). Defaults to none if not specified. whois_show_server: opers #servprotect: # This block configures the servprotect plugin; you don't need this if you aren't using it. # length: How many KILL/SAVE's before a disconnect? #length: 5 # age: Determines how much time (in seconds) should pass before the servprotect cache is reset. # Note: updates to this option require a reload of the servprotect plugin, which automatically # resets the cache. #age: 10 automode: # The following options in this block are common to all plugins that spawn service bots (games, # automode, etc.): # Sets the nick of the Automode service, if you're using it. If not defined, this defaults to # the service name ("automode" in this case). nick: Automode #ident: Automode # For each service, you can also specify what prefix modes you want the service bot to join channels with. # Setting this to op (+o) for Automode makes it appear more like a standard IRC service, and lessens # the risk of mode overrides being dropped. joinmodes: 'o' # Determines whether a separate service bot should be spawned for this plugin. This defaults to # True, unless a network's protocol module doesn't support spawning extra service bots. # This option overrides the global "spawn_services" option defined in "pylink:". # If this is set to False, this plugin's commands and channels will be merged into that of the # main PyLink service bot. #spawn_service: true # Defines a fantasy prefix for the Automode bot (requires spawn_services to be set and the # fantasy plugin to be loaded). This overrides the "prefix" option in the "pylink:" config # block. prefix: "@" # Determines whether this bot should respond to its nick (requires spawn_services to be set and the # fantasy plugin to be loaded). This overrides the "respond_to_nick" option in the "pylink:" config # block. #respond_to_nick: true # Determines whether we should show unknown command errors for this service bot. Defaults to True. # This overrides the "show_unknown_commands" option in the "pylink:" config block. #show_unknown_commands: true games: # Sets the nick of the Games service, if you're using it. This defaults to "games" if not defined. nick: Games # Ident, host, and realname can also be specified here, but they may be overriden per-network. #ident: games #host: play.games #realname: Games Service # Defines a fantasy prefix for the Games bot. prefix: "./" stats: # Determines the time format that the Stats plugin should use for showing dates + times. # Defaults to "%a, %d %b %Y %H:%M:%S +0000" (the RFC 2812 standard) if not specified. time_format: "%c" #global: # Sets the text format for the global plugin, if it is loaded. This uses a template string as # documented at https://docs.python.org/3/library/string.html#template-strings, with the # following substitutions: # $sender: the nick of the sender # $network: the short network name of the origin network # $fullnetwork: the full network name of the origin network # $current_channel: the channel we're broadcasting on # $current_network: the network we're currently broadcasting on # $current_fullnetwork: the full name of the network we're currently broadcasting on # $text: the global text #format: "[$sender@$fullnetwork] $text" # Configures a set of channel globs to exempt from announcements. You can also add to # this per network via: servers::<server name>::global_exempt_channels, # the contents of which will be merged into this list. #exempt_channels: # - "#*staff*" #antispam: # This block configures the antispam plugin; you don't need this if you aren't using it. # Antispam is automatically enabled in all channels that it's in, and you can configure # its presence (like with all service bots) by setting 'antispam_channels' on the applicable # networks. # Antispam also integrates with relay by punishing users locally (so that bans, kills, etc. # are not bounced by relay) and not relaying messages marked as spam. # Determines the minimum level of channel access needed to be exempt from Antispam. # Note: opers are automatically exempt. # Valid values are "voice", "halfop", and "op". This defaults to "halfop" if not set. #exempt_level: halfop # Determines whether Antispam should strip formatting before applying filter checks. # Defaults to true if not set. #strip_formatting: true #masshighlight: # This block configures options for antispam's mass highlight blocking. It can also be # overridden (as an entire block) per-network by copying its options to: # servers::<server name>::antispam_masshighlight # Determines whether mass highlight prevention should be enabled. Defaults to false if not # set. #enabled: true # Sets the punishment that Antispam should use against mass highlighters. # Valid values include "kill", "kick", "ban", "quiet", "block", and combinations of these # strung together with "+" (e.g. "kick+ban"). Defaults to "kick+ban" if not set. #punishment: kick+ban # Sets the kick / kill message used when mass highlight prevention is triggered. #reason: "Mass highlight spam is prohibited" # Sets the minimum message length and amount of nicks needed in a message for # mass highlight prevention to trigger. #min_length: 50 #min_nicks: 5 #textfilter: # This block configures options for antispam's text spamfilters. It can also be overridden # (as an entire block) per-network by copying its options to: # servers::<server name>::antispam_textfilter # Determines whether text spamfilters should be enabled. Defaults to false if not set. #enabled: true # Sets the punishment that Antispam's text spamfilter should use. # Valid values include "kill", "kick", "ban", "quiet", and combinations of these strung # together with "+" (e.g. "kick+ban"). Defaults to "kick+ban+block" if not set. # If you want to use Antispam with PM monitoring (see the "watch_pms" option below), you # will want to include at least one punishment that is not channel-specific # ("kill" or "block"). # Punishments not supported in a context or network (e.g. kicking for PM spam or "quiet" # on a network that doesn't support it) will be silently dropped if others succeed. # If no punishments succeed, then a warning will be logged. #punishment: kick+ban+block # Sets the kick / kill message used when a message triggers the text spamfilter. #reason: "Spam is prohibited" # Determines whether PMs to PyLink clients should also be tracked to prevent spam. # Valid values include false (the boolean value), 'services', and 'all': # - If this is set to false, PMs are ignored by text filtering. # - If this is set to 'services', only PMs sent to services are checked for spam (this allows # them to effectively act as PM spam traps) # - If this is set to 'all', all PyLink clients (including relay users) have incoming PMs # checked for spam. # This defaults to false if not set. #watch_pms: false # Configures a case-insensitive list of bad strings to block in messages (PRIVMSG, NOTICE). # Globs are supported; use them to your advantage here. # You can also define server specific lists of bad strings by defining # servers::<server name>::antispam_textfilter_globs # the contents of which will be *merged* into the global list of bad strings specified below. #textfilter_globs: # - "*very bad don't say this*" # - "TWFkZSB5b3UgbG9vayE=" #partquit: # This configures Antispam's part / quit message filter for plugins like Relay. It can also be # overridden (as an entire block) per-network by copying its options to: # servers::<server name>::antispam_partquit # Determines whether part and quit messages matching any text spamfilters will be filtered. # These default to true if not set. #watch_parts: false #watch_quits: false # Sets the message to use when a part or quit message is filtered. #part_filter_message: Reason filtered #quit_filter_message: Reason filtered # Configures a case-insensitive list of bad strings to block in part and quit messages. # Globs are supported; use them to your advantage here. # You can also define server specific lists of bad strings by defining # servers::<server name>::antispam_partquit_globs # the contents of which will be *merged* into the global list of bad strings specified below. #partquit_globs: # - "*some-spammy-site.xyz*"

Mon	Tue	Wed	Thu	Fri	Sat	Sun
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30